Euro Drawer SlidesBall Bearing Drawer Slides Metabox Drawer SlidesTandem Drawer SlidesTandembox Drawer Slides

 

Guides Metabox.

 

Guides for drawers Metabox. Calculation and installation guides for example Metabox Blum.

 

 
 
 
 
 
 

Metabox drawer slides (Метабоксы, ещё называют металлбоксы).

Common notions of guides Metabox drawers.

Metabox - is the guiding system, created on the basis of roller guides. In Metaboxes unlike roller guides, a portion of the sidewall of the drawer guide, the second portion Metaboxes similar to roller guides and fixed to the sidewall of the drawer units.

Metaboxes mainly the guiding system part way out, but there are solutions for Blum Metabox full extension.

 

Guides Metabox covered high impact system or epoxy paint, which is not so easy to chop off in the company's performance, which does not guarantee cheap Chinese manufacturers. Operational problems arise when Metaboxes wrong calculation and installation. Plastic rollers in Metaboxes resistant to high loads, metaboxes withstand dynamic loads similar roller guides, the order of 25 kg.

Benefits Metaboxes front roller and ball guide:

  • The thin metal sidewalls increases strength and interior drawer

  • Design Metaboxes provides enough thick bottoms, for this reason the bottom is made of particleboard Metaboxes instead of fiberboard, which increases the load capacity on the box.

  • Metaboxes easy to install. First, do not make separate sides and attach those guides. Secondly, Metaboxes provides a convenient mounting adjustment facade that allows you to set exactly facade housing furniture.

  • Unlike conventional roller guides, which are mounted in the bottom of the walls of the box, the system guides Metaboxes at the top of the box. This makes it more convenient to Metabox nomination and closing than roller guides (not box sways from side to side).

Height drawer sides with guide Metabox 54, 86, 118 and 150 mm. If annoying harshness Metaboxes closing, the mechanism allows smooth closing BLUMATIC reduce this negative point using Metaboxes to a minimum.

Guides Metabox.

Guides Metabox.

Metabox drawer, double gallery.

Metabox drawer, double gallery.

Metabox drawer with BOXSIDE.

Metabox drawer with BOXSIDE.

BLUMATIC smooth closing mechanism, in the terminology of this sounds like Blum BLUMOTION, designed for single extension drawer restricted cabinet width up to 900 mm. Mechanism needs one and mounted it on the left side.

Closer Metabox drawer BLUMOTION.

Closer Metabox drawer BLUMOTION.

Installation scheme mechanism BLUMOTION for Metaboxes.

Installation scheme mechanism BLUMOTION for Metaboxes.

Many people do not know that the height of the sides of the box can be increased Metabox using rails, as well as to have accrued side were solid using single-walled BOXSIDE for METABOX.

 

In order to increase the board Metaboxes we additionally need to purchase a set of rails for the corresponding depth Metaboxes, holders and rails in the form of metal boards for two single-BOXSIDE METABOX.

Metabox drawer side wall using BOXSIDE.

Metabox drawer side wall using BOXSIDE.

Do not forget that with increasing height box, and increases the height of the rear wall Metabox drawer. Rails can be installed height as one and two.

Metabox drawer with one railing.

Metabox drawer with one railing.

Optional accessories allows complicating to Blum on the degree of functionality to the level Metabox tandemboxes expensive systems, called it all - the system of internal organization box ORGA-LINE.

ORGA-LINE system in a box metabox.

ORGA-LINE system in a box Metabox.

Calculation and installation guides Metabox.

Calculation Metaboxes start with our drawer units, to install use metaboxes 150 mm in height, but complicate the task.

Drawer unit with drawers on guides Metabox.

Drawer unit with drawers on guides Metabox.

Since the review of information Metaboxes you realize that opportunities Metaboxes much more, we will add to our two boxes on the side of Railing. For the calculation we use the program DYNALOG, which makes it easy to design and calculate metaboxes for any applications.

Drawer unit with two drawers and two Metabox carrier unit on the side.

Drawer unit with two drawers and two Metabox carrier unit on the side.

The program provides information to cutting, from which we are particularly interested in the dimensions of the bottom and the back wall the box on the guides Metabox. Further useful information on the article, the number of accessories for mounting Metaboxes. The table shows that need 2 sets Metaboxes, two left and right mounts Metaboxes 4 paces adjustable Railing.

No less important information we get further from the drawings drilling sidewall drawer units under Metabox guides, as well as drilling the back wall and drawer units facades. Small incision point is that facilitate tightening screws, holes in the facades of 10 mm diameter and 12 mm deep to install rails.

Drilling sidewall drawer units under Metabox guides.

Drilling sidewall drawer units under Metabox guides.

Drilling the back wall box Metabox.

Drilling the back wall box Metabox.

Drilling under Metabox drawer fronts and rails.

Read on:

roller guides

guides tandem

ball guide

guides tandemboxes

 

 

Articles:

 

» Home site.

 

» About us.

 

» European drawer slides.

 

» Ball bearing drawer slides.

 

» Metabox drawer slides.

 

» Tandem under mount slides.

 

» Tandembox drawer slides.

 
 

Metabox drawer slides.

Copyright © 2013 - 2015 «Drawerslideschoice.com».